Asbestos Control

Purpose Protecting Workers and others from occupational illness associated with Asbestos containing materials.
Definition Asbestos is a heat-resistant fibrous silicate mineral that can be woven into fabrics and is used in fire-resistant and insulating materials such as pipe and duct insulation. The asbestos fibers are also used as a bonding agent in drywall taping mud, ceiling texture and in stucco. NOTE: All buildings planned for demolition built prior to 1990 must have had an asbestos inventory completed and submitted to the appropriate Regulatory Body. This will identify if asbestos is present and in what material. All asbestos containing materials must be abated and disposed of by a licensed Contractor.
Hazards

This list of potential hazards is not comprehensive. Workers are required to complete a Hazard Assessment prior to starting this task to ensure all hazards are identified and controlled.

 Chemical:

  • Asbestos exposure can cause irreversible cancers.
Controls Administrative:

  • Asbestos inventory performed by a licensed asbestos contractor
  • Exposure Control Plan (ECP)
  • Hazard Assessment
  • Appropriate Worker training and credentials

Personal Protective Equipment:

  • Basic PPE: Safety Footwear
  • Task Specific PPE: Disposable Tyvek coveralls (with hood, snug wrist/ankles), Disposable gloves and booties, Respiratory Protection
Work Site Supervisory Responsibility Do

  • Report all suspected asbestos to the Regional Safety Manager.
  • Post required warning.
  • Secure the affected area and all remaining access points.
  • Plan and coordinate the asbestos inventory performed by a licensed asbestos contractor.
  • Ensure that an Exposure Control Plan (ECP) has been developed and communicated to all worker prior to starting work.
  • Ensure work is being completed by certified and qualified personnel.

Do not

  • Allow unauthorized persons into the contaminated area.
  • Attempt to remove or disturb any suspected asbestos containing materials until proper identification and risk assessment have been completed.
Worker Responsibility Do

  • Follow supervisors’ instructions.
  • Report all suspected asbestos and asbestos containing materials to your Supervisor immediately.
  • Ensure to use assigned PPE correctly.
  • Participate in the required training.

Do not

  • Enter an Asbestos restricted area until the Supervisor deems the area safe.
  • Attempt to remove or disturb any suspected asbestos containing materials until proper identification and risk assessment have been completed.
Version Date of Creation or Revision Reviewed and Accepted By
V.0 09/14/22 Phil Fileccia, Bill Laursen, Christian Ravary, Karoly Ban Matei, Sebastian Pop
V.1 01/12/24 Phil Fileccia, Bill Laursen, Christian Ravary, Karoly Ban Matei, Sebastian Pop
V.2 10/07/25 Christian Ravary, Karissa Neilson, Moe Deishidi, Natasha Deitz

In this section: